SURFACE PREPARATION
The surface must be dry, firm and clean of dust, other debris and loose old paint. Wet scrubbing is recommended to prepare the surfaces.
»On new surfaces: before applying the paint, apply a coat of KRAFT ECO DUR AQUA.
»On surfaces that need repair: use KRAFT SPACHTEL or KRAFT PUTTY or the appropriate KRAFT repair material.
»Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.
IMPLEMENTATION INSTRUCTIONS
»The product is not suitable for painted surfaces.
»Minimize paint waste by calculating the amount of paint you will need.
»Before you start painting, dilute 50-80% by volume. with tap water and stir well. 50% dilution is provided for roof application.
»Stir well before use and during application
»Painting tools: Brush, roller or airless gun
»Apply 1 coat of KRAFT ECO DUR AQUA for an ideal result. Then apply 2 coats of the final product.
»Minimum repaint time 4-6 hours.
»Surface drying in 1-3 hours at 25 ° C and relative humidity 50%. Drying time is affected by weather conditions.
»Do not apply at temperatures below 10 ° C and above 35 ° C as well as above 65% relative humidity.
INSTRUCTIONS FOR AFTER IMPLEMENTATION
»Recover excess paint to reuse.
»Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from sun exposure or frost.
»Reuse of colors can really minimize the environmental impact of product life cycle.
»Clean tools immediately after use with warm soapy water.