Name: Eco Stain Blocker Aqua Ecological acrylic insulating substrate, for indoor and outdoor use KRAFT
SKU: 19413
Availability: InStock

Eco Stain Blocker Aqua Ecological acrylic insulating substrate, for indoor and outdoor use KRAFT

€8,40 – €21,10

Matte Ecological insulating substrate for water dispersion, plastic and acrylic paints for indoor and outdoor use. Due to its special composition, it prevents the migration of dry stains from nicotine smoke, old damp markers, brown juices, etc., on the surface of the final coating. Enhances the surface adhesion, increases the performance, durability and durability of the final paint. It contributes to the ideal finish of the surface due to its work and its high coverage capacity, thus reducing the required coatings of the final paint. It is applied as an insulating substrate of plastic and acrylic paints on painted surfaces, as well as on new ones properly prepared from plasterboard, cement board and concrete. Ideal for nurseries, kindergartens, schools and hospitals.

»Excellent stain insulation ability
»High coverage
»Very good traction

Packaging
1 L, 10 L, 3 L

Shades
White

Σε απόθεμα

SURFACE PREPARATION
The surface must be dry, firm and clean of dust, other debris and loose old paint.
Wet scrubbing is recommended to prepare the surfaces.
»On new surfaces: before applying the paint, apply 1-2 coats of KRAFT ECO STAIN BLOCKER AQUA.
»On surfaces that need repair: use KRAFT SPACHTEL or KRAFT PUTTY or the appropriate KRAFT repair material.
»On stained surfaces: apply 1-2 coats of KRAFT ECO STAIN BLOCKER AQUA.
»On moldy surfaces: remove mold with KRAFT MOLD BLOCKER. Then apply 1-2 coats of KRAFT ECO STAIN BLOCKER AQUA.
»Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

IMPLEMENTATION INSTRUCTIONS
»Minimize paint waste by calculating the amount of paint you will need.
»Before you start painting, dilute up to 12% vol. with tap water and stir well.
»Painting tools: Brush, roller or airless gun.
»The product is white and is painted exclusively with the KRAFT INSPIRED COLOR color system in thousands of light shades.
»Apply 1-2 coats of KRAFT ECO STAIN BLOCKER AQUA for an ideal result. Then apply the appropriate final product.
»Minimum repaint time 6-8 hours. In cases of very dirty surfaces, repainting is recommended after 24 hours.
»Surface drying in 1-2 hours at 25 ° C and relative humidity 50%. Drying time is affected by weather conditions.
»In case of choosing a dark shade of low coverage or a shade with the appropriate indication from the KRAFT INSPIRED COLLECTION fan, it is recommended to precede application with KRAFT ECO STAIN BLOCKER AQUA painted in a light shade of the same color family.
»Do not apply at temperatures below 10 ° C and above 35 ° C as well as above 65% relative humidity.

INSTRUCTIONS FOR AFTER IMPLEMENTATION
»Recover excess paint to reuse.
»Close the container tightly to keep it in good condition for future use and store it before and after use in a cool place away from exposure
in the sun or frost.
»Reuse of colors can really minimize the environmental impact of product life cycle.
»Clean tools immediately after use with warm soapy water.

Weight

N/A

Eco Stain Blocker Aqua

10Lt, 1Lt, 3Lt