General features
High hardness varnish for direct renovation of parquet and laminate floors.
Product Properties
ίζει Renovates wooden and laminate floors
Εφαρμογή Direct application with DIRECT PROTECT technology
■ Strong protection: extremely resistant to daily stress (staining, walking, etc.)
Performance
Approximately 12m2 / l
Packaging
750ml and 2.5lt
Preparation
Surface preparation is NECESSARY. The surface to be painted must be clean, dry and free of grease or other substances that impede the proper adhesion of the material.
Application
The ideal application conditions are between 12 ° and 25 ° C on a dry floor, in the absence of air currents.
Step 1: Shake the container thoroughly before use, turning it over several times until you are sure that the contents are homogeneous.
Step 2: Apply using a brush or 12-mm roller specially designed for acrylic floor varnish.
Step 3: Spread the product richly by applying crosswise and finish in the direction of the wood fibers.
Step 4: Allow to dry for 3 hours.
Step 5: Lightly scrape off (120 grit sandpaper) and remove dust. Then apply a second coat. If required, you can apply a third coat without fading between coatings. You do not need to get rid of laminate flooring. The second layer is applied directly.
Step 6: Allow to dry for 24 hours. Use the area carefully in the days following the application of the varnish. The product takes about 2 weeks to acquire its full properties.